Blog

Customer Applications

Free industry resources, showcasing innovative products and methods aimed at helping you address industry specific challenges. Information designed to help you get the most out of your people, equipment and consumables.

Induction Heating Used for Removal of Hydroelectric Generator Rotor

21 June, 16 1:48 pm · Leave a comment · Colin Brown
Share
Facebooktwitterlinkedinmail

Induction Heating for Rotor Expansion Lift
A customer involved in the rebuilding of a hydroelectric power generation station came to Red-D-Arc with a unique challenge: Use induction heat to help separate a massive rotor from its center shaft assembly. A traditional approach is to use a combination of open flame along with dry ice which would have taken several weeks to set up and also ran the risk of being ineffective due to the scale and complexity of the project.

Sil Nonis, an induction heating specialist at Red-D-Arc, suggested using 6 induction heating units activated in sequence to provide thermal growth in a uniform pattern; releasing the interference from the center shaft before lifting the rotor. The 6 Miller ProHeat 35 Induction Heating Systems powered two half circle assemblies, positioned at the bottom of the locking ring which was 5′ in diameter as well as two half circle assemblies positioned on a top locking ring which was 4′ in diameter. Massive rotor arms also had 4 pads attached to them, positioned in sequence.

Setup took approximately 2 days and removal of the rotor was completed in a single day. The same process will be used to reinstall the rotor after it has been rebuilt. Over the next few years two additional rotor assemblies will be removed, rebuilt and reinstalled using the same process.

Red-D-Arc Works on The Wilshire Grand Centre

14 April, 16 2:14 am · Leave a comment ·
Share
Facebooktwitterlinkedinmail

Red-D-Arc provided ProHeat 35 induction heating systems during the construction of The Wilshire Grand Centre in Los Angeles. Large box columns of various sizes and weights needed to be pre-heated during the fabricating and erecting process. Red-D-Arc suggested the use of Pro Heat 35 induction heating systems and helped design fixtures for the heating cables so the box columns could be pre-heated safely and effectively. The 73 story, 1100 foot tower is planned to be completed in 2017 and will become the tallest tower in California!

AirGas Logo

Airgas, an Air Liquide company, is the nation's leading single-source supplier of gases, welding and safety products. Known locally nationwide, our distribution network serves more than one million customers of all sizes with a broad offering of top-quality products and unmatched expertise.